

Description:
- Epoxy putty with metal additives
- Bonds metal, glass, plastic, ceramics, wood, etc.
- Usage: for the best adhesion of the putty, clean and roughen the surface to be processed
- Squeeze the desired amount of putty from the stick
- Stir until the color of the putty becomes uniform
- Apply the putty to the surface before it starts to harden (usually within two minutes)
- Hardens in 15 minutes. (reaches full strength after 1 hour)
- Can be drilled, tapped or otherwise machined after one hour
- Non-conductive
- If you need to work with the putty under water, press the mixed putty to the surface and keep it pressed until it starts to harden
- H315 Irritating to skin; H319 Causes severe eye irritation; H317 May cause an allergic skin reaction; H335 May cause respiratory irritation